|
|
|||||||
| Register | FAQ | Members List | Calendar | Today's Posts | Search |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#5
02-08-21, 03:55 PM
|
|||
|
|||
|
337a
JHogan,
Your quadrant hardware is correct - bolts with spacers and nuts on the prop controls. My 66 has the same set up. Figure 89, item 7, has the listing for the hardware for the prop control, says "QUADRANT END OF CONTROL". Jeff Last edited by JAG : 02-08-21 at 04:03 PM. 
|
Threaded Mode