|
|
|||||||
| Register | FAQ | Members List | Calendar | Today's Posts | Search |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#4
06-05-22, 05:57 PM
|
|||
|
|||
|
If you have the jacks easier in my opinion. Kind of a PIA to remove all that stuff, plus you don’t have to use a 90 dollar tube of the red PRC compound to seal the plates.
Swivel fitting is actually pretty easy to do. Hardest part on reassembly is to use 2 pieces of aluminum on your vice to squeeze the two parts together to install the retaining circlip. Dan 
|
Threaded Mode