|
|
|||||||
| Register | FAQ | Members List | Calendar | Today's Posts | Search |
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#2
12-01-19, 03:06 PM
|
|||
|
|||
|
That would be owner produced
|
|
#3
12-01-19, 09:10 PM
|
||||
|
||||
|
Quote:
Nice alternative Dan, just so others understand this option Owner produced parts in the reg's says REPLACEMENT AND MODIFICATION PARTS(a) Except as provided in paragraph (b) of this section, no person may produce a modification or replacement part for sale for installation on a type-certificated product unless it is produced pursuant to a Parts Manufacturer Approval issued under this subpart.(b) This section does not apply to the following  1) Parts produced under a type or production certificate.(2) Parts produced by an owner or operator for maintaining or altering his own product.(3) Parts produced under an FAA Technical Standard Order.(4) Standard parts (such as bolts and nuts) conforming to established industry or U.S. specifications.SECTION 21.303More here https://www.savvyaviation.com/wp-con...uced-parts.pdf
__________________
Herb R Harney 1968 337C Flying the same Skymaster for 47 years
|
Hybrid Mode
